Emulex LP9802DC Uživatelský manuál stáhnout pdf (Strana 30)

Driver for HP-UX - Troubleshooting Section Page 27

lpfcN: 37 : Abort Target I/O: issue_abort

DESCRIPTION: This is displayed if the SCSI layer detects that it needs to abort all I/O to a specific

device. This results in an FCP Task Management command to abort the I/O in progress. The target

N_Port ID, SCSI ID, and LUN are recorded.

LOG: WARNING always fcstratb.c

ACTION: Check state of target in question.

lpfcN: 38 : FCP command failed

DESCRIPTION: This indicates a target has sent us a FCP RSP error. Because of the amount of

information that needs to be recorded, two back to back messages are generated. The first records the

IOCB information, the IOCB cmd, Iotag, status, and parameter error field. The second records FCP

information, N_Port ID, SCSI ID, LUN, and FCP response status bytes.

LOG: WARNING FCP verbose fcscsib.c

ACTION: Check the state of the target in question.

lpfcN: 39 : Cannot issue FCP command

This indicates we no longer have a valid login with a target. The target N_Port ID, SCSI ID, and LUN are

recorded.

LOG: WARNING always fcstratb.c

ACTION: Check the state of the target in question.

lpfcN: 40 : No room on IP xmit queue

DESCRIPTION: This message indicates the system is generating IOCB commands to be processed,

faster than the adapter can process them.

LOG: WARNING IP verbose fcxmitb.c

ACTION: Check the state of the link. If the link is up and running, reconfigure the xmit queue size to be

larger. Note, a larger queue size may require more system IP buffers. If the link is down, check physical

connections to Fibre Channel network.

lpfcN: 41 : Stray XmitSequence completion

DESCRIPTION: Received an XMIT_SEQUENCE IOCB completion without issuing a corresponding

XMIT_SEQUENCE Command (based on the iotag field in the XMIT_SEQUENCE_CR iocb). The IOCB

command and iotag used to match are recorded.

LOG: ERROR always fcxmitb.c

ACTION: This error could indicate a software driver or firmware problem. If problems persist report

these errors to Technical Support.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35

Žádné komentáře

Emulex LP9802DC Uživatelský manuál Strana 30