Emulex LightPulse LPe1105-M4 HBA Instalační příručka

EMC CorporationCorporate Headquarters:Hopkinton, MA 01748-91031-508-435-1000www.EMC.comEMC® Host Connectivity with EmulexFibre Channel Host Bus Adapt

10EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentPrefaceRelateddocumentationThe following documents are available on

100EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentUpdating the Adapter and CEE/Menlo FirmwareEach firmware file cont

Updating the adapter firmware with hbacmd101Updating the Adapter and CEE/Menlo FirmwareNote: If you are using the adapter to boot from the SAN, update

102EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentUpdating the Adapter and CEE/Menlo FirmwareUpdating Emulex CEE /Me

Updating Emulex CEE /Menlo firmware for LP21000-E/LP21002-E FCoE adapters103Updating the Adapter and CEE/Menlo Firmwarethe firmware file name determin

104EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentUpdating the Adapter and CEE/Menlo FirmwareUpdating Emulex BIOS/fi

Updating Emulex BIOS/firmware for the OCe10102-FM-E/OCe10102-FX CNA adapters105Updating the Adapter and CEE/Menlo Firmware◆ For HBA or FCoE CNA, the b

106EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentUpdating the Adapter and CEE/Menlo FirmwareFigure 8 Firmware updat

Updating Emulex BIOS/firmware for the OCe10102-FM-E/OCe10102-FX CNA adapters107Updating the Adapter and CEE/Menlo FirmwareTo update the OCe10102-FM-E/

108EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentUpdating the Adapter and CEE/Menlo FirmwareThe updating process is

Connecting to the Storage1096Invisible Body TagThis chapter provides information on connecting to the storage.◆ Zoning and connection planning in a fa

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment11PrefaceWhere to get help EMC support, product, and licensing inform

110EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageZoning and connection planning in a fabri

Enabling persistent binding111Connecting to the StorageEnabling persistent bindingIn a fabric environment, EMC recommends, but does not require, enabl

112EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageEditing /usr/src/lpfc/lpfc.confThe Emulex

Enabling persistent binding113Connecting to the Storage4. Add the WWPN and SCSI ID information to the lpfc_fcp_bind_WWPN parameter. The SCSI ID consis

114EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageOriginal ramdisk image /boot/initrd-2.4.2

Enabling persistent binding115Connecting to the Storage3. Set the lpfc_scan_down parameter as follows:The default setting is:lpfc_scan_down=1Change it

116EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the Storage7. Create a new ramdisk to reflect the ch

Configuring Emulex OCe10102-FM-E/OCe10102-FX iSCSI CNA for iSCSI connectivity117Connecting to the StorageConfiguring Emulex OCe10102-FM-E/OCe10102-FX

118EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageAn IP must be configured on the OCe10102-

Configuring Emulex OCe10102-FM-E/OCe10102-FX iSCSI CNA for iSCSI connectivity119Connecting to the StorageTable 9 lists a description for each field in

12EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentPreface

120EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the Storage

Configuring a Boot Device on an EMC Storage Array1217Invisible Body Tag With the introduction of the Emulex v7.x-series driver, EMC supports booting R

122EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayCautions and rest

Cautions and restrictions booting from an EMC storage array123Configuring a Boot Device on an EMC Storage ArrayVNX series- and CLARiiON-specific cauti

124EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayLimitationsThis s

Limitations125Configuring a Boot Device on an EMC Storage Array◆ The Symmetrix, VNX series, or CLARiiON device that is to contain the Master Boot Reco

126EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Arraylocal disks in th

Limitations127Configuring a Boot Device on an EMC Storage Array◆ During the installation procedure, it is recommended that only one LUN be assigned to

128EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayConfiguring a Sym

Configuring a Symmetrix boot device129Configuring a Boot Device on an EMC Storage Array◆ Disable the BIOS on any other HBAs in the system other than t

Introduction131Invisible Body TagThis document describes the procedures for installing an EMC-approved Emulex adapter into a Linux host environment an

130EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array13. The next scre

Configuring a Symmetrix boot device131Configuring a Boot Device on an EMC Storage Array◆ If the OS to be installed is RHEL 3.0 U6, U7, U8, or RHEL 3.9

132EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayConfiguring a VNX

Configuring a VNX series or CLARiiON boot device133Configuring a Boot Device on an EMC Storage Array◆ SCSI hard disks are allowed in SAN boot configur

134EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array9. Press ESC to r

Configuring a VNX series or CLARiiON boot device135Configuring a Boot Device on an EMC Storage ArrayWhat next? Select the appropriate section dependin

136EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayInstalling an ope

Installing an operating system on a Symmetrix, VNX series, or CLARiiON137Configuring a Boot Device on an EMC Storage Arraycontains the necessary kit t

138EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayAlthough EMC does

Installing an operating system on a Symmetrix, VNX series, or CLARiiON139Configuring a Boot Device on an EMC Storage ArraySince the Emulex v7.3.x driv

14EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentIntroductionPurpose of this documentThis document is meant to assis

140EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayDo not remove the

Installing supported RHEL 4, RHEL 5, OEL 4, OEL 5, Asianux 2.0, Asianux 3.0, SLES 9, SLES 10, and SLES 11 op-141Configuring a Boot Device on an EMC St

142EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayInstalling RHEL 5

Installing RHEL 5.2 and SLES 10 SP2 operating systems onto a boot device using FCoE Adapters143Configuring a Boot Device on an EMC Storage Array5. Ins

144EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayThe following mes

Upgrading the Linux kernel145Configuring a Boot Device on an EMC Storage ArrayUpgrading the Linux kernelAfter successfully completing the installation

146EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array

Additional Notes1478Invisible Body TagThis chapter provides additional notes to consider.◆ Ethernet connectivity over the CNA...

148EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesEthernet connectivity over the CNAThe Emulex FCoE

Using the Emulex lun-scan script149Additional NotesUsing the Emulex lun-scan scriptContained on the EMC approved web page of the Emulex website is a s

Boot device support15IntroductionThe benefits of FCoE technology become apparent in large data centers:◆ Where dense, rack-mounted and blade server ch

150EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesTo scan on a single Emulex adapter, run the comman

Device reconfiguration procedures151Additional NotesDevice reconfiguration proceduresThe Linux v2.6.x kernel lacks a command built into the kernel tha

152EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentAdditional Notes• For the Navisphere Host Agent:/etc/init.d/naviag

Device reconfiguration procedures153Additional NotesThe unloading of the module can be accomplished with the modprobe (with the -r switch) command or

154EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesDevice reconfiguration: Device numberingIn the Lin

HPQ server-specific note155Additional NotesHPQ server-specific noteWhen using Compaq systems, it is highly recommended that the Compaq SmartStart CD b

156EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesLUN 000 requirement for the Linux v2.6.x kernelLUN

Linux device-naming convention157Additional NotesLinux device-naming conventionThe four high-level device drivers in Linux are:sd - Direct access (dis

158EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesSuSE SLES 7 support a maximum of 128 SCSI devices

Linux device-naming convention159Additional NotesTherefore, if you have allocated LUNs from 0 through 255 to the SLES 8 Linux host, the host can scan

16EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentIntroductionZoningWhen using Linux hosts in a fabric environment, t

160EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentAdditional Notesdevice file names. Not all Linux distributions pro

Device reconfiguration procedures161Additional NotesDevice reconfiguration proceduresLinux currently lacks an actual kernel command that allows for a

162EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentAdditional Notes• For the Navisphere Host Agent:/etc/init.d/naviag

Device reconfiguration procedures163Additional NotesThe unloading of the module can be done with either the modprobe (with the -r switch) or rmmod com

164EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesRescanning the SCSI busThe SCSI bus may be rescann

Incorporating EMC Fibre Channel165Additional NotesIncorporating EMC Fibre ChannelAfter the EMC storage array has devices assigned with device addresse

166EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentAdditional Notes

Special Instructions167AInvisible Body TagThis appendix contains special instructions for the following: ◆ CLARiiON “Ghost” LUN reported with the Emul

168EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentSpecial InstructionsCLARiiON “Ghost” LUN reported with the Emulex

CLARiiON “Ghost” LUN reported with the Emulex v7.1.14 and v7.3.2 drivers (PQB filter)169Special InstructionsHost: scsi2 Channel: 00 Id: 00 Lun: 02 Ven

Useful Linux utilities and functions17IntroductionUseful Linux utilities and functionsThese utilities and functions can be helpful in performing confi

170EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentSpecial InstructionsFor example:cd /bootcp initrd-2.4.21-27.0.4.EL

(CLARiiON only): Required /etc/modules.conf edit for RHEL 2.1, RHEL 3.0, and SLES 8.0 default modularkernels171Special Instructions(CLARiiON only): Re

172EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentSpecial InstructionsA kernel compilation is not required when appe

(CLARiiON only): Required /etc/modules.conf edit for RHEL 2.1, RHEL 3.0, and SLES 8.0 default modularkernels173Special Instructions• For SuSE distribu

174EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentSpecial Instructions(CLARiiON only): Linux Navisphere Agent/CLI li

(CLARiiON only): Linux Navisphere Agent/CLI limitation with fdisk on CLARiiON175Special InstructionsDisabling the Navisphere Agent serviceAfter the Na

176EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentSpecial InstructionsIn order to remove the RPM, stop the Naviagent

(CLARiiON only): Linux Navisphere Naviagent/CLI limitation with VERITAS Volume Manager v3.2 on CLARi-iON177Special Instructions(CLARiiON only): Linux

178EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentSpecial Instructions(CLARiiON only): Linux Navisphere Agent requir

(CLARiiON Only): Linux Navisphere Agent requirement for RHEL 3.0 Intel Itanium systems179Special Instructions(CLARiiON Only): Linux Navisphere Agent r

18EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentIntroductionEMC storage array-specific settingsRefer to the EMC Hos

180EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentSpecial Instructions

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment181AAsianux 1.0 64Asianux 2.0 hosts, editing Emulex driver parameter

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment182Indexutilities 17LP6DUTIL 37lp6dutil 37lpfc_2.6_driver_kit-8.0.

Installation Steps192Invisible Body TagThis chapter outlines the prerequisites for first-time installation, offers a summary of the installation steps

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment2Copyright © 2011, 2012 EMC Corporation. All rights reserved.Publishe

20EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstallation StepsPrerequisites for first-time installationIn order

Prerequisites for first-time installation21Installation StepsFollow the links to your adapter for the appropriate version.Linux driver The Linux drive

22EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstallation StepsSummary of installation stepsTable 2 describes th

Summary of installation steps23Installation Steps5 Install the HBanywhere applications kit.“Installing the Emulex HBAnywhere applications kit” on page

24EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstallation StepsInstalling the adapterThis section contains the f

Installing the adapter25Installation Steps2. With host system power removed, install the adapter card and cables as instructed in the server documenta

26EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstallation Steps– LC optical cable:– Cisco SFP+ (Twinax cable)5.

Installing the adapter27Installation Steps◆ PCI-X◆ PCI-X 2.0◆ PCI-ExpressPCI slots can be 32-bit and 64-bit (denoted by their 124-pin or 188-pin conne

28EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstallation StepsFigure 3 Adapter edge connectorsNote adapter 5, w

Installing the adapter29Installation Stepsnegotiate with the slot to determine the highest mutually supported number of lanes. However, an adapter req

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the LiInux Environment3Preface...

30EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstallation StepsNote that a few adapters are keyed universally, b

Installing and Configuring the BIOS Settings313Invisible Body Tag This chapter provides information on installing and configuring the BIOS settings. ◆

32EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS SettingsVerifying and updating

Verifying and updating the Emulex firmware and boot BIOS33Installing and Configuring the BIOS Settings• If the banner does not display the required ve

34EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS SettingsMethod One — Updating t

Method One — Updating the adapter boot BIOS with hbacmd35Installing and Configuring the BIOS SettingsLPe111-E ybXX.X..all (whereXXX. is the version)Ex

36EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS Settings3. Execute the command

Method Two – Booting from a DOS bootable diskette and using the lp6dutil utility37Installing and Configuring the BIOS SettingsMethod Two – Booting fro

38EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS SettingsMethod Three – Using lp

Method Three – Using lputil at the command line (for the Emulex 7.x driver)39Installing and Configuring the BIOS SettingsEach firmware file contains f

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the LiInux Environment4ContentsMethod Two – Booting from a DOS bootable diskette and using

40EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS Settings2. Start the firmware u

Method Three – Using lputil at the command line (for the Emulex 7.x driver)41Installing and Configuring the BIOS Settings2. Download the appropriate b

42EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS Settings3. Copy the file for Op

Installing and Configuring the Linux Host with the Emulex Driver434Invisible Body TagThis chapter describes the procedures for installing an EMC-appro

44EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverIns

Installation instructions for the Emulex v8.x-series driver45Installing and Configuring the Linux Host with the Emulex DriverDownloading the Emulex v8

46EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverIns

Installation instructions for the Emulex v8.x-series driver47Installing and Configuring the Linux Host with the Emulex DriverRemoving Emulex DFC drive

48EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex Driver3.

Installation instructions for the Emulex v8.x-series driver49Installing and Configuring the Linux Host with the Emulex DriverThe output from running t

5EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the LiInux EnvironmentContentsDescription of the Emulex lpfc driver parameters...

50EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex Drivercom

Installation instructions for the Emulex v8.x-series driver51Installing and Configuring the Linux Host with the Emulex DriverRestoring old Emulex driv

52EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverOri

Installation instructions for the Emulex v8.x-series driver53Installing and Configuring the Linux Host with the Emulex DriverRed Hat RHEL 4 U2SuSe SLE

54EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverSuS

Installation instructions for the Emulex v8.x-series driver55Installing and Configuring the Linux Host with the Emulex Drivera. For models LP21000/LP2

56EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverUni

Exercising the Emulex v8.x-series device driver57Installing and Configuring the Linux Host with the Emulex DriverExercising the Emulex v8.x-series dev

58EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex Driver◆ S

Exercising the Emulex v8.x-series device driver59Installing and Configuring the Linux Host with the Emulex Driverdisc_adisc issue_lip m

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the LiInux Environment6ContentsConfiguring a Symmetrix boot device...

60EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverHW

Exercising the Emulex v8.x-series device driver61Installing and Configuring the Linux Host with the Emulex Driverhost:/usr/sbin/hbanyware # ./hbacmd a

62EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex Driver01:

Installation instructions for the Emulex v7.x-Series driver63Installing and Configuring the Linux Host with the Emulex DriverInstallation instructions

64EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex Driverali

Installation instructions for the Emulex v7.x-Series driver65Installing and Configuring the Linux Host with the Emulex DriverNote: When attaching to a

66EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex Drivermpt

Installation instructions for the Emulex v7.x-Series driver67Installing and Configuring the Linux Host with the Emulex Driver4. Download the IOCTL App

68EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverIns

Installation instructions for the Emulex v7.x-Series driver69Installing and Configuring the Linux Host with the Emulex Driver7. Select the appropriate

7EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the LiInux EnvironmentContentsLinux device-naming convention...

70EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverThe

Installation instructions for the Emulex v7.x-Series driver71Installing and Configuring the Linux Host with the Emulex DriverLooking for kernel source

72EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex Drivero T

Installation instructions for the Emulex v7.x-Series driver73Installing and Configuring the Linux Host with the Emulex DriverVNX series or CLARiiON st

74EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverThe

Installation instructions for the Emulex v7.x-Series driver75Installing and Configuring the Linux Host with the Emulex Driver - Installation - Insta

76EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverCre

Installation instructions for the Emulex v7.x-Series driver77Installing and Configuring the Linux Host with the Emulex DriverUse the following to unlo

78EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex Driver5.

Uninstallation of the Emulex v7.x-Series driver79Installing and Configuring the Linux Host with the Emulex DriverUninstallation of the Emulex v7.x-Ser

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the LiInux Environment8Contents

80EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverRem

Uninstallation of the Emulex v7.x-Series driver81Installing and Configuring the Linux Host with the Emulex DriverUninstalling the Emulex v7.x-Series d

82EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex Driver---

Uninstallation of the Emulex v7.x-Series driver83Installing and Configuring the Linux Host with the Emulex Driver...Restoring - lib/modules/2.4.21-27.

84EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverIns

Installing the Emulex HBAnywhere applications kit85Installing and Configuring the Linux Host with the Emulex DriverNote: To install HBAnyware, you wil

86EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverUnt

Editing the configuration files87Installing and Configuring the Linux Host with the Emulex DriverEditing the configuration filesThis section contains

88EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverTab

Editing the configuration files89Installing and Configuring the Linux Host with the Emulex DriverNote: For FCoE adapters, the FC link is virtualized w

EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment9PrefaceAs part of an effort to improve and enhance the performance a

90EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverWha

Editing the configuration files91Installing and Configuring the Linux Host with the Emulex DriverTo create a new RAM disk, use the script lpfc-install

92EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverNot

Editing the configuration files93Installing and Configuring the Linux Host with the Emulex DriverEditing the Emulex driver parameters on hosts with OE

94EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex DriverUsi

Using the Emulex lun_scan script95Installing and Configuring the Linux Host with the Emulex Driver2. If the system contained multiple Emulex HBAs, the

96EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the Emulex Driver

Updating the Adapter and CEE/Menlo Firmware975Invisible Body TagThis chapter provides information on updating the adapter and CEE/Menlo firmware for F

98EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux EnvironmentUpdating the Adapter and CEE/Menlo FirmwareUpdating the adapter fir

Updating the adapter firmware with hbacmd99Updating the Adapter and CEE/Menlo FirmwareLP10000DC-EtdXXX.all (where XXX is the version)Example: td191a1.