Emulex LP9802DC Uživatelský manuál stáhnout pdf (Strana 2)

Driver Information

Prerequisites

NetWare 6.0 with Support Pack 2 (SP2) or Support Pack 3 (SP3) and

NW56UP2 and NW6NSS2D patches.

Note If you are running Netware 6.0 with Support Pack 3 (SP3), do

not use the Mirroring Agent.

•

NetWare 5.1 with Support Pack 4 (SP4) and NW56UP1 patch.•

Netware 5.0 with Support Pack 6a.•

NetWare 4.2 is not supported by this driver; use Emulex driver version

1.23c to support NetWare 4.2.

•

Emulex Fibre Channel adapter LP9802DC (minimum firmware version

1.00a4)

•

Emulex Fibre Channel adapters LP982 and LP9802 (minimum firmware

version 1.00a2)

•

Emulex Fibre Channel adapters LP9402DC, LP9002DC, LP9002L,

LP9000 & LP952L (minimum recommended firmware version 3.90a7)

•

Emulex Fibre Channel adapters LP8000, LP8000DC and LP850

Ifyour HBA has a Dragonfly chip version 2.00 or greater, use

firmware version 3.90a7.

♦

If your HBA has a Dragonfly chip below version 2.00, use

firmware version 3.30a7.

♦

•

Emulex Fibre Channel adapter LP7000E (minimum firmware version

3.21a0)

•

Suitable target hardware; lpfc.ham complies with ANSI−T11 SAN

protocols for switched fabrics and arbitrated loops.

•

Driver version 2.10c does not support NetWare 4.2. For Netware 4.2, use

Emulex driver version 1.23c.

•

Emulex Drivers, Software and Manuals

Compatibility

(minimum firmware version 1.80a1)

Emulex Fibre Channel adapters LP10000DC, LP10000 and LP1050

•

1 2 3 4 5 6 7 ... 23 24

Komentáře k této Příručce

Žádné komentáře

Emulex LP9802DC Uživatelský manuál Strana 2

Komentáře k této Příručce

Související produkty a manuály pro ne Emulex LP9802DC